Tools

Dilution Calculator

Calculate how much stock solution and diluent to combine for your target concentration. Use molar or mass concentration units and copy the recipe into your lab notes.

Calculated in your browserCompatible unit conversion

Prepare a working solution

Enter the stock, target, and final volume.

Use compatible units: molar to molar, or mass to mass.

Calculated in your browser. No account or sample upload required. Need to convert mg/mL to µM first? Use the protein concentration calculator.

Your dilution recipe

Calculate to see the stock and diluent volumes. The prefilled example is not calculated until you submit.

The dilution formula

The amount of solute stays the same when you add a solute-free diluent. With compatible concentration units, the stock concentration times the stock volume equals the final concentration times the final volume.

C₁V₁ = C₂V₂
Vstock = Ctarget × Vfinal / Cstock
Vdiluent = Vfinal − Vstock

C₁ is the stock concentration, V₁ the stock volume, C₂ the target concentration, and V₂ the total final volume. The model assumes additive volumes. For mixtures with appreciable volume contraction, use an appropriate volumetric preparation method.

Worked example

Prepare 20 mL of a 50 µM solution from a 10 mM stock.

  1. Convert 10 mM to 10,000 µM.
  2. Stock volume = 50 / 10,000 × 20 mL = 0.1 mL, or 100 µL.
  3. Add 19.9 mL diluent to the 0.1 mL stock and mix.

The final volume is 20 mL and the dilution factor is 200.

Use Run example above to reproduce these numbers.

Frequently asked questions

How do I calculate a dilution?

Use C₁V₁ = C₂V₂. Divide the target concentration by the stock concentration, then multiply by the final solution volume to get the stock volume. The remaining volume is diluent. Convert concentrations to compatible units first.

Does final volume mean the amount of water to add?

No. Final volume includes both the stock and the diluent. For a final volume of 20 mL with 0.1 mL stock, add 19.9 mL diluent. This calculator assumes additive volumes and a diluent that contains none of the solute being calculated.

Can I dilute mg/mL to µg/mL or mM to µM?

Yes. The calculator converts units within mass concentration or within molar concentration. It does not convert between mass and molar concentration, because that requires molecular weight.

What does a dilution factor of 10 mean?

The final concentration is one tenth of the stock concentration. Use one part stock plus nine parts diluent to make ten parts final solution. It does not mean one part stock plus ten parts diluent.

Why can’t the target be higher than the stock?

Adding a solute-free diluent lowers concentration. A target above the stock requires a concentration step or a stronger stock, not dilution. Equal concentrations are allowed and require no diluent.

Can I use this for protein or antibody solutions?

Yes, when the stock and target concentrations are known and use compatible concentration units. Choose a diluent suitable for your sample and protocol. This tool calculates volumes; it does not select buffers or assay conditions.

Method reference: R&D Systems’ dilution equation and example. Use compatible concentrations and the final total volume.