Temperature and reaction rate

Arrhenius Equation Calculator

The Arrhenius equation, k = A e^(−Ea/RT), links a rate constant k to absolute temperature T through the activation energy Ea and the pre-exponential factor A. With one temperature, solve it for k, A, Ea, or T. With rate constants at two temperatures, the two-point form ln(k₂/k₁) = −(Ea/R)(1/T₂ − 1/T₁) gives the activation energy, the rate constant at a new temperature, or the temperature that produces a given k.

Browser-side calculationStep-by-step resultEducational use

Arrhenius Equation Calculator

Calculator

Choose the equation form and the unknown. Enter temperature in K or °C and activation energy in J/mol or kJ/mol, then select Calculate or press Enter.

Inputs
Choose one temperature (k = A e^(−Ea/RT)) or two temperatures (the two-point form), then the value to solve for. Scientific notation such as 1e13 or 1×10^13 is accepted.

In s⁻¹.

Load an example

Result
R = 8.314462618 J mol⁻¹ K⁻¹. Temperatures are converted to kelvin and Ea to J/mol before calculating; results are rounded to six significant figures for display.
Enter your values and select Calculate, or load an example below the inputs to see a worked answer with unit conversions and steps.
k = A e^(−Ea/RT) | ln(k₂/k₁) = −(Ea/R)(1/T₂ − 1/T₁)

Calculation method

How the calculation works

Step 1
Terms in the equation
k is the rate constant and A the pre-exponential factor, in the same units. Ea is in J/mol, R = 8.314462618 J mol⁻¹ K⁻¹, and T is in kelvin. The factor e^(−Ea/RT) is the fraction of collisions with at least the activation energy.
Step 2
Two-point form
Writing the equation at T₁ and T₂ and dividing one by the other cancels A, leaving ln(k₂/k₁) = −(Ea/R)(1/T₂ − 1/T₁). Any one of Ea, k₂, or T₂ can be found from the other values.
Step 3
Linear form and Arrhenius plot
Taking logarithms gives ln k = ln A − (Ea/R)(1/T), a straight line in 1/T with slope −Ea/R. The calculator works in this logarithmic form, so very large or small exponentials do not overflow.

Worked examples

Check the result by hand

Rate constant at one temperature
A reaction has A = 1.00 × 10¹³ s⁻¹ and Ea = 75.0 kJ/mol. Find k at 298.15 K.
  1. 1.Convert Ea to 75,000 J/mol.
  2. 2.Ea/(RT) = 75,000 ÷ (8.314462618 × 298.15) = 30.2547.
  3. 3.k = 1.00 × 10¹³ s⁻¹ × e^(−30.2547) = 1.00 × 10¹³ s⁻¹ × 7.25385 × 10⁻¹⁴.
k = 0.725 s⁻¹ (0.725385 s⁻¹ before rounding).
Activation energy from two rate constants
k = 0.0100 s⁻¹ at 300 K and k = 0.100 s⁻¹ at 330 K. Find the activation energy.
  1. 1.ln(k₂/k₁) = ln(0.100/0.0100) = ln 10 = 2.30259.
  2. 2.1/T₂ − 1/T₁ = 1/330 − 1/300 = −3.03030 × 10⁻⁴ K⁻¹.
  3. 3.Ea = −R ln(k₂/k₁) ÷ (1/T₂ − 1/T₁) = −8.314462618 × 2.30259 ÷ (−3.03030 × 10⁻⁴) = 63,178 J/mol.
Ea = 63.2 kJ/mol (63.1777 kJ/mol before rounding).
Rate constant at a new temperature
k = 0.0100 s⁻¹ at 300 K and Ea = 50.0 kJ/mol. Find k at 330 K.
  1. 1.ln(k₂/k₁) = −(Ea/R)(1/T₂ − 1/T₁) = −(50,000 ÷ 8.314462618) × (−3.03030 × 10⁻⁴ K⁻¹) = 1.82231.
  2. 2.k₂/k₁ = e^1.82231 = 6.18612.
  3. 3.k₂ = 0.0100 s⁻¹ × 6.18612.
k₂ = 0.0619 s⁻¹ (0.0618612 s⁻¹): about 6.2 times faster at 330 K.

Scope

Assumptions and limits

These limits keep the result reproducible and make unsupported inputs visible instead of guessing.

Temperature must be above absolute zero. Celsius values are converted with T(K) = T(°C) + 273.15.
k and A must use the same units, and so must k₁ and k₂. The unit selector only labels results; it does not convert between units such as s⁻¹ and min⁻¹.
The equation treats A and Ea as constant over the temperature range. Curved Arrhenius plots, for example from enzyme denaturation or a change in mechanism, need a different model, and two points cannot reveal curvature.
The calculator uses one or two data points. To fit several (T, k) pairs, plot ln k against 1/T and take Ea = −slope × R.
A negative apparent activation energy is accepted and flagged, because some multistep reactions slow down as temperature rises.

Arrhenius Equation Calculator FAQ

Frequently asked questions

How do you calculate activation energy from two rate constants?

Use Ea = −R ln(k₂/k₁) ÷ (1/T₂ − 1/T₁) with temperatures in kelvin and R = 8.314 J mol⁻¹ K⁻¹. If k rises from 0.0100 to 0.100 between 300 K and 330 K, Ea = −8.314 × ln 10 ÷ (1/330 − 1/300) = 63.2 kJ/mol.

How do you find the rate constant at a different temperature?

Rearrange the two-point form: k₂ = k₁ × e^(−(Ea/R)(1/T₂ − 1/T₁)). You need k₁, T₁, the activation energy, and the new temperature T₂. A positive Ea always gives a larger k at a higher temperature.

How much faster does a reaction go when the temperature rises by 10 °C?

It depends on Ea. A reaction with Ea ≈ 53 kJ/mol doubles its rate between 25 °C and 35 °C, which is where the "doubles every 10 °C" rule of thumb comes from. With Ea = 50 kJ/mol, k doubles from 25 °C at about 35.6 °C; larger activation energies are more sensitive to temperature.

Why must temperature be in kelvin?

The exponent Ea/RT needs absolute temperature. Using Celsius numbers directly gives the wrong exponent, and at 0 °C it would divide by zero. Add 273.15 to a Celsius temperature to convert it.

What units do k and A have?

A always has the same units as k, so the ratio k/A is dimensionless. Those units depend on the reaction order: s⁻¹ for first order and M⁻¹ s⁻¹ for second order, for example. Ea is per mole, in J/mol or kJ/mol.

How do you get the activation energy from an Arrhenius plot?

Plot ln k on the y-axis against 1/T in K⁻¹ on the x-axis. The slope of the best-fit line is −Ea/R, so Ea = −slope × R. A slope of −6,000 K gives Ea = 6,000 × 8.314 = 49.9 kJ/mol. The intercept is ln A.

Can activation energy be negative?

An elementary step cannot have a negative activation energy, but an apparent, measured value can be negative when the overall rate falls as temperature rises. This happens in some multistep mechanisms where an earlier equilibrium shifts back at higher temperature.