Chemistry yield calculation
Percent Yield Calculator
Percent yield is the actual yield divided by the theoretical yield, multiplied by 100%. Enter any two of actual yield, theoretical yield, and percent yield to find the third. The two yields can use different units, including grams for one and moles for the other when you know the product molar mass.
Percent Yield Calculator
Calculator
Choose the value you need and enter the other two. Actual yield is the product you isolated or measured; theoretical yield is the maximum amount the balanced equation allows.
Load an example
Calculation method
How the calculation works
Worked examples
Check the result by hand
- 1.Both yields are in grams, so no conversion is needed.
- 2.Divide the actual yield by the theoretical yield: 2.10 g ÷ 2.609 g = 0.80491.
- 3.Multiply by 100%: 0.80491 × 100% = 80.49%.
- 1.Convert the actual yield to grams: 742 mg ÷ 1000 = 0.742 g.
- 2.Divide: 0.742 g ÷ 0.850 g = 0.87294.
- 3.Multiply by 100%: 0.87294 × 100% = 87.29%.
- 1.Write 80.0% as the decimal 0.800.
- 2.Rearrange the formula: theoretical yield = actual yield ÷ 0.800.
- 3.Divide: 5.00 g ÷ 0.800 = 6.25 g.
Scope
Assumptions and limits
These limits keep the result reproducible and make unsupported inputs visible instead of guessing.
Percent Yield Calculator FAQ
Frequently asked questions
How do you calculate percent yield?
Divide the actual yield by the theoretical yield and multiply by 100%. Both yields must be in the same unit first. For example, 8.5 g of product from a theoretical yield of 10.0 g gives 8.5 ÷ 10.0 × 100% = 85%.
What is the difference between actual yield and theoretical yield?
Theoretical yield is the maximum amount of product the balanced equation allows when the limiting reactant is used up completely. Actual yield is the amount you isolate and measure in the experiment.
How do I calculate actual yield from percent yield?
Multiply the theoretical yield by the percent yield written as a decimal. A 72% yield from a theoretical yield of 12.0 mmol gives 12.0 mmol × 0.72 = 8.64 mmol.
How do I find the theoretical yield?
Start from the balanced equation. Convert each reactant amount to moles, find the limiting reactant, use the mole ratio to get moles of product, and multiply by the product molar mass for grams. The theoretical yield calculator does these steps for you.
Why is percent yield usually less than 100%?
Reactions may not go to completion, side reactions can form other products, and some product is lost during filtering, transfer, and purification.
Can percent yield be greater than 100%?
The arithmetic can give a value above 100%, but a reaction cannot form more product than the theoretical yield. A result above 100% usually means the product is still wet with solvent or water, contains impurities, or that one of the yields was measured or calculated incorrectly.
Can I use grams for one yield and moles for the other?
Yes, if you know the product molar mass. Choose the units you have and enter the molar mass when the calculator asks for it. For example, 2.10 g of aspirin at 180.159 g/mol is 0.011656 mol.
How many significant figures should percent yield have?
Percent yield comes from a division, so round it to the fewest significant figures among the measured values. The factor of 100 is exact. Enter 10.0 rather than 10 if the trailing zero was measured.